Description

SKILLS AND SPECIALTIES:

1- Wheel Alignment – 3 Nos.
2- Automotive Electrician with Knowledge in Car Aircon Repairs (A/C)- 2 Nos
3- Automotive Mechanics - 2 Nos

GCC Experiences of at least 2 years required with Candidates shall have TRANSFERABLE IQAMA only

Roles and Responsibilities
1. Wheel Alignment Technician (3 Nos.)
• Inspect vehicle suspension, steering, and tires before alignment, and identify worn or damaged parts.
• Measure and adjust camber, caster, toe, and thrust angle using computerized alignment equipment.
• Operate and calibrate alignment machines and check that readings match manufacturer specifications.
• Replace or adjust tie rods, ball joints, control arms, and related steering components.
• Balance wheels and check tire pressure and tire wear patterns.
2. Automotive Electrician with A/C Repair Knowledge (2 Nos.)

Electrical:
• Able to operate OBD Scanners
• Diagnose faults in the battery, alternator, starter motor, wiring harnesses, fuses, relays, and lighting systems.
• Use multimeters, scan tools, and diagnostic equipment to read fault codes and trace electrical faults.
• Repair or replace faulty wiring, connectors, switches, sensors, and control modules.
• Install and test accessories such as lights, audio systems, alarms, and cameras.

A/C:
• Inspect and diagnose A/C problems such as weak cooling, leaks, noise, or compressor failure.
• Recover, evacuate, and recharge refrigerant using proper A/C service equipment.
• Replace A/C components including the compressor, condenser, evaporator, expansion valve, filters, and hoses.
• Perform leak tests and check system pressures and cooling performance.

3. Automotive Mechanic (2 Nos.)
• Perform routine servicing: oil and filter changes, fluid checks, and inspection of belts, hoses, and brakes.
• Diagnose and repair engine, transmission, clutch, cooling, fuel, and exhaust system problems.
• Service and replace brake components, including pads, discs, drums, and brake lines.
• Repair or replace suspension parts such as shock absorbers, bushings, and springs.
• Conduct pre-delivery and safety inspections and road tests after repairs.
• Order and verify spare parts, and keep accurate repair records.
• Maintain tools, equipment, and workshop house

Please Send your resume/CV